I Made My Own **** Ring

After reading the classic book "The Joy of Sex" many years ago, I was struck by an entry about "**** rings". I had never heard of them before, and it had never occurred to me to try one.

The illustration showed a jade or ivory carved ring with ribbon straps attached, but I still had no idea how it worked. It seemed so eastern, mystical to me when the entry described Tibetan monks wearing them!

But eventually, curiosity got the better of me, and I began looking around. An Adam and Eve's catalog suggested that leather straps could be worn and cinched down around the scrotum for a great feeling and prolonging arousal. So, I was tempted to order one.

But first, I looked at the strap and realized it was basically just a dog or cat collar. So I went to my local large grocery store and examined what was in the pet aisle. I found several with embroidered sayings "Woof", "I love my cat" and paw prints and such. But I found one that was just red nylon woven belt, not too wide, and with a simple buckle on the end. There was no expansion joint, as this was before pet lovers decided that the humane thing to do was to allow a pet to slip it's collar if caught.

I bought the red one and proceeded to our family hardware store. This old type store had a nails and fasteners section that could not be beat! I looked in the bins and barrels until I found a selection of steel rings. They varied in size from the wedding ring up to the three inch monster. Remembering about what size I was when erect (yes, I had measured with a flexible measuring tape once, and came up with an estimate of 1 1/2") I hefted several in each hand, weighing them and estimating what would work. I gulped, swallowing hard, and made my choice. I walked to the counter, convinced that the clerk was going to ask me what it was for. He didn't.

I got the items home, immediately went into the bathroom, ******** completely and stood  nude before the sink and full length mirror.  I was already growing erect in anticipation of the fun.  First, I slid the steel ring over my shaft, and it easily cleared the head, barely making any contact, and I feared I had gone a size too large. I noticed that my shaft is not a perfect circle in cross-section, but more of a flattened oval. That's why the ring appears loose as it slides down the shaft.  By the time it impacted my pubes, it was filled, but not tight, and I thought I might have to take it back for a smaller ring.

Then I turned to the cat collar, which from now on was no longer a pet device. It took a little coordination, but I wrapped it around my scrotum on the bottom behind my balls, and then brought the buckle together above the shaft of my ****. It threaded nicely, and I was able to cinch it down one, two holes before it compressed me enough to be snug. I noticed the belt tongue excess was supposed to slip through a metal D-ring to attach a tag or a leash and I had an inspiration!

I walked to the tool drawer and pulled out a pair of pliers and vice grips.   A few minutes later, with careful manipulation, I had turned the D-ring enough to reveal the split in the ring, and expanded it carefully just enough to admit the steel ring. Then I closed the loop, and made sure the D-ring split was aligned and turned back around to look normal. Now I had the steel ring linked to the collar.

Again, I slid the steel ring over my shaft. This time I was pleased there was a little room cause the D-ring took up a little space as well.  Once the steel ring was against my pubes, I flipped the dangling collar around and wrapped my package again, just behind the balls under the scrotum. This time, the fit was slightly more snug, and between the ring tugging on my erection and the strap compressing my scrotum, I had a nice tight fit.

My **** surged and swelled, slightly constricted at the sides, as the steel ring was held at a slight angle and not perfectly seated against my abdomen.

I couldn't have designed a better fit!  Here I was, totally nude with my nuts being held in place by a strap that held my scrotum and my shaft was trapped in a permanent erection that wouldn't quit. I just had to try it out. A few strokes convinced me that my glans had never been larger, and was turning crimson while the sliding of the skin up and down the shaft was restricted by the ring and belt. (In fact, I'm wearing it as I write this now!)

I imagined how well it would work during intercourse, and discovered that it intensified all the sensations by reducing the flexibility. I stroked away and come to a screaming climax. My ***** shot in an arc above the toilet into the bowl as I discovered that the urethra was not pinched nor impeded in any way.

I couldn't wait for my wife to get home, I had such a surprise for her in bed that night!  But that's a tale for another entry...
studfinder studfinder
56-60, M
3 Responses May 16, 2012

Great story! I've found some cool stuff in the local feed store, in the tack section. Lots of brass rings for harness repairs! And a local Tandy leather shop is another great source.<br />
It's great being a handy guy . . .

Remember, you need to be able to remove that **** ring in a hurry if necessary...and experts say worn for no longer than 20 minutes at a time with removing it and letting the blood circulate freely for another several minutes!

Well, I've got some that are custom-sized to me, and they don't constrict. The "classic" sex ring is intended to prolong erections, but when sized larger, they function safely as adornment. That being said, I can't wear any of the swimwear or undergarments with elastic rings because _those_ cut off my circulation enough that after 20 minutes my balls are killing me and I've got to get out. I wound up cutting the rings out of the garments! Also important is the temperature when you wear the ring. I'm usually nude, so when it's cooler and my "stuff" is tighter, I wear one that is just a bit bigger. When it's 105 in the shade here I can wear a smaller one. I've had them almost fall off when it's that hot and my balls are all relaxed! So you can see I've got blood circulation as a top concern.

I'm not familiar with swimwear or undergarments that contain elastic rings... or do I misunderstand your statement?

No. you didn't misunderstand. Several "labels" add enhancement features to their underwear, or swimwear. The ones I've seen in underwear are elastic, "one size fits all" that don't fit me at all! I think a solid ring is the way to go and you wear it with whatever you want.

1 More Response

Thank you i will try my owne

cool..i trying putting on a large ring from a key ring (the lg ones}, and it slid down fine and made for an extreme ***** but i always thought it was too tight and cut into my skin and was afraid i might damage the working mechanism of the penis. silicone ones are great..snug, but expand with your **** expansion. i went to the same type of hardware store and bought a few large rubber/silicone/plastic(i don't know what they are made of) O rings, for water fittings. one single ring with my nuts and **** slipped in, is great for all day wear..very comfy.very sexy.

Just make sure you have a pair of sharp scissors right at hand in case you have to remove it in a hurry, or things get out of hand!

hahah...i don't think there is room for dental floss let alone a scissor.